Arje Metal Industries manufactures copper tubes for plumbing & refrigeration in full accordance with the appropriate product standards. Customers specify our products when quality and performance count.
| Standards | | Phosphorus deoxidized copper (DLP) | Standard | ASTM B -75 | BS 2871 | JIS H 3300 | DIN 1787 | | Symbol | C 12000 | C 106 | C 1201 | SW -CU | | Phosphorus deoxidized copper (DHP) | Standard | ASTM B-68 | BS 2871 | JIS H 3300 | DIN 1785 | | Symbol | C -12200 | C 106 | C 1220 | C 1220 | | Tough Pitch Copper (ETP) | Standard | - | BS 2871 | JIS H 3300 | DIN 1787 | | Symbol | C 11000 | C 101 | C 1100 | ECU 58 |
| Dimensional Range | - Outer Diameter - 4mm to 90mm.
- Wall Thickness - 0.40 mm and above.
- Available in length up to 6 meters.
- Produced in a variety of tempers (viz. hard, half hard, quarter hard and soft annealed) depending upon the specific requirement.
- Standards other than those mentioned above are also available on request.
| End Uses: |
Air conditioning and Refrigeration, Heat exchangers, Condensers, Evaporators, Plumbing & Sanitation, Solar applications, Oil burner tubing, Steam, Water, Air and Hydraulic lines, Automobiles, Chemicals & Fertilizers, Thermal power plant, Petrochemical & Oil refinery, Brewery tubes, Gas lines, Vapour lines, Locomotives etc.
|
| |
 |
| Copper Tubes For Refrigeration | | |
| We provide copper tubes with a complete range of outer diameter and wall thickness combinations, engineered to exact specifications to meet the highest standards of performance as required by the refrigeration and air conditioning industry. These copper tubes are available in a variety of tempers to suit the intended applications. These copper tubes can be supplied either in straight lengths or coiled as per the requirement. As demand for operating efficiencies increases, Arje Metal Industries is your reliable source for precision and quality flow products to meet your objectives. Our products meet the highest industry standards and provide superior cleanliness for the contaminant-free transportation of refrigerants, oxygen and other gases.
|
| Copper Tubes For Engineering Applications | | |
Copper tubes are used in general engineering purposes mainly because of its thermal conductivity, electrical conductivity, malleability, strength and corrosion resistance. Arje Metal Industries produces a vast range of copper tubes to satisfy all customer requirements in term of diameter, thickness, tolerance and tempers complying with all the most important national and international standards. Our range of copper tubes have roundness, straightness, uniformity of the wall thickness, smooth inner and outer surface to make it the ideal choice for engineering applications.
|
|
| Copper Tubes For Heat Exchangers | | |
| Our copper tubes are manufactured to special requirements as to dimensional tolerances, finish and tempers for use in condensers and heat exchangers. These copper heat exchanger tubes are generally supplied in straight length in annealed & half hard temper. The copper tubes produced by arje metal industries not only have the tight tolerances but also have the most consistent dimensions throughout the tube length. The tube surface is clean both inside and outside with no corrosive stains. The copper tubes produced by arje metal industries are suitable to transfer heat in a wide variety of operating conditions and to resist corrosion for the longest period of time possible under the harshest operating conditions.
|
| Copper Tubes For Plumbing | | |
Arje Metal Industries prides itself on being the dependable supplier of superior flow products for the residential and commercial installations. We manufacture copper tubes for residential and commercial plumbing. We provide a complete range of sizes and types, engineered to exact specifications to meet the highest standards of performance. The copper tubes manufactured by arje metal industries can sustain a temperature up to 660C with a long lasting service life, better flow characteristics, rust and scale free inside and virtually without any leakage coupled with easy bend ability, handling and installation.
Arje Metal Industries have brought together the best quality, smooth bore, hard drawn copper tubes in a variety of outer diameter and wall thickness combination to suit the desired application.
|
|
| Copper Tubes For Solar Applications  | | |
| To meet the ever increasing demand of copper tubes for the emerging market of solar water heating systems arje metal industries produces seamless drawn copper tubes in half hard temper and a variety of outer diameter and wall thickness combination. These tubes are supplied in straight lengths & cut to the specific lengths to avoid wastage.
Arje metal industries offers its customers a clean surface copper tube suitable for all solar thermal absorbers where good welding properties and quality is paramount and hence it is the recommended choice, especially when using ultrasonic or laser welding technology. Our products ensure reduced welding time and increased efficiency of your manufacturing process while saving time and money due to fewer cleaning processes.
|
| Copper Tubes For Electrical Applications | | |
Copper has been used in the electrical industry for many years because it offers excellent electrical conductivity. Copper is also used as lightening arrester in the electrical transformers. It is very efficient leading to high current densities. These tubes are available in a wide range of outer diameter, wall thickness and temper conditions depending upon the requirement to suit the intended applications.
|
|
| Copper Tubes For Air Conditioning  | | |
| We manufacture and export high quality air conditioning copper tubes in the whole world. Our tubes are easy to installed, while providing water tight seal. These copper tubes are available in a variety of tempers to suit the intended applications. These copper tubes can be supplied either in straight lengths or coiled as per the requirement. As demand for operating efficiencies increases, arje metal industries is your reliable source for precision and quality flow products to meet your objectives. Our products meet the highest industry standards and provide superior cleanliness for the contaminant-free transportation of refrigerants, oxygen and other gases.
|
| Copper Pipes & Tubes | | |
ARJE copper pipes & tubes for medical gas pipeline
Medical gas pipeline system for hospitals:
A centralized MGPS is today recognized as a basic life support infrastructural requirement of a hospital. It's a life saver in places like OT, ICU. CCU and Nursery saving effort and time required at emergency situations. ARJE Copper MGPS have overcome all the disadvantages with respect to conventional gas cylinder. Ensuring never-ending supply of oxygen and or vacuum to help and clinician/caregiver save his/her patient without concern.
ARJE Copper meets the mandatory inspection requirements:
Chemical composition
Copper + Silver = minimum 99.90%
Phosphorous = minimum 0.015%. max 0.040%
Carbon Content Test
Window based software determines the content of carbon on the inner surface of copper tubes and fittings using combustion method,
Tensile strength
ARJE Copper pipes have been tested to the best of its tensile strength keeping in mind all the testing norms in the industry.
Non Destructive test
Each tube is subjected to an Eddy current test for detection of local defects. We are the only manufacturer of this category (Medical) of tubes
ARJE Copper Tubes Compatible for CFC-Free Refrigerant for VRV, VRF, RACs, Visicooter, Refrigerator and Other ACR Applications
The use of copper in air-conditioning and refrigeration systems has grown steadily in recent years. ARJE Copper tubes increases the efficiency of the system and substantially reduces the emission of harmful gases and SPMs. ARJE copper tubes are designed for longer service life.
ARJE Copper Pipes Are Also Available With ARJE Copper Fittings For The Complete ACR Applications.
Other Applications of ARJE Copper Pipes: Medigas Pipeline Plumbing LPG/CNG Gas Pipeline I City Gas Distribution.
Copper Tubes : 3/16 Dia to 6 Dia ©Copper Fin Tubes «Copper Fittings : 1/4 Dia to 5 Dia **Only manufacturer in India having In-House Carbon Content Test facility as per EN 723
Specifications:
ASTM B68 / ASTM B75 / ASTM B280 / ASTM B88 / JIS H 3300 / EN1057 or BS2871 / IS2501 / Internal Client Specifications.
APPLICABLE STANDARDS
A) Copper Tubes:
i) BS 2871 Part I : Copper Tubes for water, gas & sanitation
ii) BS EN 1057 : Seamless, round copper tubes for water and gas in sanitary and heating applications
iii) ASTM B 88 : Seamless Copper Water tube
MAXIMUM WORKING PRESSURES
The maximum working pressures al temperature upto 650° C are calculated using the following formula:
P= 20Ft/D-T Where P= maximum working pressure (bar) F=design stress (n/mm2)
T=minimum wall thickness (mm) D=maximum outside diameter (mm)
Tubes installed underground, laid under floors or in other inaccessible places must be able to withstand twice the maximum working pressure. The values of F used in above formula depend upon the condition of the tube and are given below :
|
|
| Copper Tubes For Medical & Gas Applications | | |
| ARJE Copper produces specially cleaned and degreased copper tube suitable for use in medical and industrial gas applications. These tubes are produced in accordance with ASTM B 819 and are rigorously tested to make sure they are suitable for the exacting requirements of critical medical and gas application industry. These copper tubes generally supplied in as drawn temper and are fitted with plastic caps after cleaning to maintain the allowable residue limit of 0.0035 g/sq. ft of interior tube surface area. Special care and handling is given to these tubes to prevent contamination of the system.
|
| Industrial Copper Tube | | |
Copper Tubes TO as 1432 : 2000
| TYPE A | | Nominal Size | Nom. Dia.
(Outside) | Nom. Wall
Thickness | Previous Size | DN 6 *
DN 8 *
DN 10 *
DN 15 *
DN 18 *
DN 20 *
DN 25 *
DN 32 *
DN 40 *
DN 50
DN 65
DN 80
DN 90
DN 100
DN 125
DN 150
DN 200 | 6.4
7.9
9.5
12.7
15.9
19.1
25.4
31.8
38.1
50.8
63.5
76.2
88.9
101.6
127.0
152.4
203.2 | 0.9
0.9
1.0
1.0
1.2
1.4
1.6
1.6
1.6
1.6
1.6
2.0
2.0
2.0
2.0
2.6
2.6 | 1/4" x 20G
5/16" x 20G
3/8" x 19G
1/2" x 19G
5/8" x 18G
3/4" x 17G
1" x 16G
1¼" x 16G
1½" x 16G
2" x 16G
2½" x 16G
3" x 14G
3½" x 14G
4" x 14G
5" x 14G
6" x 12G
8" x 12G |
| TYPE B | | Nominal Size | Nom. Dia.
(Outside) | Nom. Wall
Thickness | Previous Size | DN 6 *
DN 8 *
DN 10 *
DN 15 *
DN 18 *
DN 20 *
DN 25 *
DN 32 *
DN 40 *
DN 50
DN 65
DN 80
DN 90
DN 100
DN 125
DN 150
DN 200 | 6.4
7.9
9.5
12.7
15.9
19.1
25.4
31.8
38.1
50.8
63.5
76.2
88.9
101.6
127.0
152.4
203.2 | 0.7
0.7
0.9
0.9
1.0
1.0
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
2.0
2.0 | 1/4" x 22G
5/16" x 22G
3/8" x 20G
1/2" x 20G
5/8" x 19G
3/4" x 19G
1" x 18G
1¼" x 18G
1½" x 18G
2" x 18G
2½" x 18G
3" x 16G
3½" x 16G
4" x 16G
5" x 16G
6" x 14G
8" x 14G | |
| TYPE C | | Nominal Size | Nom. Dia.
(Outside) | Nom. Wall
Thickness | PREVIOUS
SIZE | DN 10 *
DN 15 *
DN 18 *
DN 20 *
DN 25 * | 9.5
12.7
15.9
19.1
25.4 | 0.7
0.7
0.9
0.9
0.9 | 3/8" x 22G
1/2" x 22G
5/8" x 20G
3/4" x 20G
1" x 20G | |
| TYPE D | | Nominal Size | Nom. Dia.
(Outside) | Nom. Wall
Thickness | Previous Size | DN 32
DN 40
DN 50
DN 65
DN 80
DN 90
DN 100
DN 125
DN 150 | 31.8
38.1
50.8
63.5
76.2
88.9
101.6
127.0
152.4 | 0.9
0.9
0.9
0.9
1.2
1.2
1.2
1.4
1.6 | 1¼" x 20G
1½" x 20G
2" x 20G
2½" x 20G
3" x 18G
3½" x 18G
4" x 18G
5" x 17G
6" x 16G | |
DN = Dimensionless Number
|
|
| Copper Alloy Tubes | | |
| Copper Tubes as per Australian Standards as 1432 :2000
| TYPE A | | Nominal Size | Nom. Dia. (Outside) | Nom. Wall Thickness | Previous Size | DN 6 *
DN 8 *
DN 10 *
DN 15 *
DN 18 *
DN 20 *
DN 25 *
DN 32 *
DN 40 *
DN 50
DN 65
DN 80
DN 90
DN 100
DN 125
DN 150
DN 200 | 6.4
7.9
9.5
12.7
15.9
19.1
25.4
31.8
38.1
50.8
63.5
76.2
88.9
101.6
127.0
152.4
203.2 | 0.9
0.9
1.0
1.0
1.2
1.4
1.6
1.6
1.6
1.6
1.6
2.0
2.0
2.0
2.0
2.6
2.6 | 1/4" x 20G
5/16" x 20G
3/8" x 19G
1/2" x 19G
5/8" x 18G
3/4" x 17G
1" x 16G
1¼" x 16G
1½" x 16G
2" x 16G
2½" x 16G
3" x 14G
3½" x 14G
4" x 14G
5" x 14G
6" x 12G
8" x 12G |
| TYPE B | | Nominal Size | Nom. Dia. (Outside) | Nom. Wall Thickness | Previous Size | DN 6 *
DN 8 *
DN 10 *
DN 15 *
DN 18 *
DN 20 *
DN 25 *
DN 32 *
DN 40 *
DN 50
DN 65
DN 80
DN 90
DN 100
DN 125
DN 150
DN 200 | 6.4
7.9
9.5
12.7
15.9
19.1
25.4
31.8
38.1
50.8
63.5
76.2
88.9
101.6
127.0
152.4
203.2 | 0.7
0.7
0.9
0.9
1.0
1.0
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
2.0
2.0 | 1/4" x 22G
5/16" x 22G
3/8" x 20G
1/2" x 20G
5/8" x 19G
3/4" x 19G
1" x 18G
1¼" x 18G
1½" x 18G
2" x 18G
2½" x 18G
3" x 16G
3½" x 16G
4" x 16G
5" x 16G
6" x 14G
8" x 14G | |
| TYPE C | | Nominal Size | Nom. Dia. (Outside) | Nom. Wall Thickness | Previous Size | DN 10 *
DN 15 *
DN 18 *
DN 20 *
DN 25 * | 9.5
12.7
15.9
19.1
25.4 | 0.7
0.7
0.9
0.9
0.9 | 3/8" x 22G
1/2" x 22G
5/8" x 20G
3/4" x 20G
1" x 20G | |
| TYPE D | | Nominal Size | Nom. Dia. (Outside) | Nom. Wall Thickness | Previous Size | DN 32
DN 40
DN 50
DN 65
DN 80
DN 90
DN 100
DN 125
DN 150 | 31.8
38.1
50.8
63.5
76.2
88.9
101.6
127.0
152.4 | 0.9
0.9
0.9
0.9
1.2
1.2
1.2
1.4
1.6 | 1¼" x 20G
1½" x 20G
2" x 20G |
|
| Copper Alloy Tube | | |
Copper Tube to as 1571 : 1995
| Straight Lengths | Size
(mm) | Inches
& SWG | Nominal
kg/m | * Safe Working Pressure KPa | SD = 33.9
50-75°C | SD = 32.7
100-125°C | SD = 28.0
150-175°C | SD = 21.9
175-200°C | 6.4 x 0.91
9.5 x 0.91
12.7 x 1.02
12.7 x 0.91
15.9 x 0.91
19.1 x 1.02
19.1 x 0.91
22.2 x 1.22
22.2 x 0.91
25.4 x 1.22
25.4 x 0.91
28.6 x 1.22
28.6 x 0.91
31.8 x 1.22
31.8 x 0.91
34.9 x 1.22
34.9 x 0.91
38.1 x 1.22
38.1 x 0.91
41.3 x 1.22
41.3 x 0.91
44.5 x 1.22
44.5 x 0.91
50.8 x 1.63
50.8 x 1.22
50.8 x 0.91
54.0 x 1.63
54.0 x 1.22
54.0 x 0.91
66.7 x 1.63
66.7 x 1.22
76.2 x 1.63
101.6 x 1.63 | 1/4" x 20
3/8" x 20
1/2" x 19
1/2" x 20
5/8" x 20
3/4" x 19
3/4" x 20
7/8" x 18
7/8" x 20
1" x 18
1" x 20
1 1/8" x 18
1 1/8" x 20
1 1/4" x 18
1 1/4" x 20
1 3/8" x 18
1 3/8" x 20
1 1/2" x 18
1 1/2" x 20
1 5/8" x 18
1 5/8" x 20
1 3/4" x 18
1 3/4" x 20
2" x 16
2" x 18
2" x 20
2 1/8" x 16
2 1/8" x 18
2 1/8" x 20
2 5/8" x 16
2 5/8" x 18
3" x 16
4" x 16 | 0.139
0.221
0.335
0.302
0.383
0.416
0.464
0.721
0.545
0.829
0.626
0.938
0.708
1.047
0.789
1.156
0.870
1.265
0.951
1.373
1.032
1.483
1.114
2.253
1.700
1.276
2.398
1.809
1.357
2.981
2.245
3.417
4.581 | 9950
6395
5280
4670
3680
3420
3035
3525
2600
3060
2260
2700
2000
2425
1790
2200
1630
2010
1490
1850
1370
1700
1270
2015
1495
1110
1890
1400
1045
1520
1135
1330
990 | 9590
6170
5095
4500
3550
3300
2930
3400
2500
2950
2180
2600
1925
2340
1725
2125
1570
1940
1435
1785
1320
1650
1225
1945
1445
1070
1825
1350
1000
1470
1095
1280
955 | 8200
5280
4360
3860
3040
2825
2500
2900
2145
2530
1865
2235
1650
2000
1480
1820
1345
1660
1230
1530
1130
1415
1050
1665
1235
915
1560
1160
860
1260
935
1100
820 | 6425
4130
3400
3020
2380
2200
1960
2280
1675
1980
1460
1750
1290
1565
1155
1420
1050
1300
960
1195
885
1100
820
1300
965
715
1220
900
675
985
730
860
640 |
|
|
| Copper Tubes For Plumbing | | |
| Arje copper prides itself on being the dependable supplier of superior flow products for the residential and commercial installations. We manufacture copper tubes for residential and commercial plumbing in full accordance with appropriate product standards including bs 2871 part i, astm b 88 and stringent european standards bs en 1057:1996. We provide a complete range of sizes and types, engineered to exact specifications to meet the highest standards of performance. The copper tubes manufactured by tube tech can sustain a temperature up to 660c with a long lasting service life, better flow characteristics, rust and scale free inside and virtually without any leakage coupled with easy bend ability, handling and installation.
Copper tubes are specified in the bs 2871 / en 1057 in three wall thicknesses designated under table x, y & z.
At arje copper, we are poised to bring our customers an unsurpassed line of quality flow control products as per astm b 306 for the dwv industry. Arje copper have brought together the best quality, smooth bore, hard drawn copper tubes in a variety of outer diameter and wall thickness combination to suit the desired application.
|
| Copper Tubes For Marine Applications | | |
Our industrial copper tubes and copper pipes can be widely utilized in the design of seawater systems for their excellent resistance to corrosion and bio fouling and many other excellent properties. Copper corrodes at negligible rates in unpolluted air, water, and deaerated nonoxidizing acids. Copper alloy artifacts have been found in nearly pristine condition after having been buried in the earth for thousands of years, and copper roofing in rural atmospheres has been found to corrode at rates of less than 0.4 mm in 200 years.
Copper alloys resist many saline solutions, alkaline solutions, and organic chemicals. However, copper is susceptible to more rapid attack in oxidizing acids, oxidizing heavy-metal salts, sulfur, ammonia (NH3), and some sulfur and NH3 compounds.
Copper is widely used in applications like freshwater and seawater supply lines, heat exchangers, condensers, shafting, valve stems, and marine hardware - in which resistance to seawater, hydrated salt deposits, and biofouling from marine organisms is important.
|
|
| Copper Square Tubes | | |
|
|
|
| | | ARJE copper manufacture copper tubes in square shape to meet the increasing demand of these tubes for general engineering purposes. Our facilities are capable of producing special tube shapes such as: elliptical, D shaped, rectangular, hexagonal etc. Mechanical properties and chemical composition are in accordance with ASTM or other common standards, as well as special customers requirements. These tubes are available in a variety of outer diameter and wall thickness combinations ranging from 6 mm to 40 mm with wall thickness 0.7 mm and above. |
|
| Copper Sleeves | | |
ARJE copper produces a range of precision copper & brass sleeves to cater the specific requirements of our customers. Customized as per the given specification by the customer, these sleeves are appreciated for their excellent quality and performance. These sleeves can also be supplied with tin or nickel plating depending upon the requirement. The main features of these sleeves are: wear resistant available in different sizes as per the requirements, able to withstand high temperatures.
|
|
| Copper Pancake Coils | | |
| We are counted among the major pancake coils manufacturers and suppliers from india. We manufacture copper pancake coils from optimum quality copper that assures durability and reliability. From every nook and corner of India, we have been receiving repeated orders for the Copper Alloy Pancake Coils due to their inexplicable performance.
Features : - Abrasion free
- Precisely designed to perfection
- High durability
- Available in varied range
| O.D(inch) | Thickness(inch) | Length(ft) | | 1/8" to 7/8 | 0.014" to 0.059" | <100 |
| Standard | Copper Alloy NO. | Chemical Composition | Mechanical Properties |
|
| CU% | P% | Temper | Tensile strength (Mpa) | Elongation (%) | Average Grain Size (mm) | | ASTM B280/68 | C12200 | >99.9 | 0.015 to 0.040 | >60 | >205 | >40 | >0.040 |
|
|
|
| >50 | >245 | - | 0.015 ~ 0.040 |
|
| Lagged Tubes | | |
Lagged Tubes For Recycled Water Actual tube actual tube length pack 12.70 x 0.91 1/2” x 20g 6m 25 19.05 x 1.02 3/4” x 19g 6m 25 25.40 x 1.22 1” x 18g 6m 25 31.75 x 1.22 1 1/4” x 18g 6m 150 38.10 x 1.22 1 1/2” x 18g 6m 100 50.80 x 1.22 2” x 18g 6m 75 63.50 x 1.22 2 1/2” x 18g 6m 60 76.20 x 1.63 3” x 16g 6m 40 101.60 x 1.63 4” x16g 6m 15
|
|
| Copper Tubes Lagged Coils For Gas | | |
| Lagged coils for gas Actual tube actual tube length pack Size Size Qty. (Metric) (Imperial) 6.35 x 0.91 1/4” x 20g 18m 1 7.94 x 0.91 5/16” x 20g 18m 1 * Safe Working Pressures applicable up to 50°C. 9.52 x 0.91 3/8” x 20g 18m 1
|
| Seamless Copper Tube To ASTM B280 | | |
Seamless copper tube for air conditioning and refrigeration field service
| Straight Lengths | Standard
Size, in. | Outside Dia.
in. (mm) | Wall Thickness
in. (mm) | Weight, lb/ft
(kg/m) | Nom. Weight,
kgs 5.8 metres | * Safe Working
internal pressures
PSI (KPa) 150°F | 3/8
1/2
5/8
3/4
7/8
1 1/8
1 3/8
1 5/8
2 1/8
2 5/8
3 1/8
3 5/8
4 1/8 | 0.375 (9.52)
0.500 (12.7)
0.625 (15.9)
0.750 (19.1)
0.875 (22.2)
1.125 (28.6)
1.375 (34.9)
1.625 (41.3)
2.125 (54.0)
2.625 (66.7)
3.125 (79.4)
3.625 (92.1)
4.125 (104.8) | 0.030 (0.76)
0.035 (0.89)
0.040 (1.02)
0.042 (1.07)
0.045 (1.14)
0.050 (1.27)
0.055 (1.40)
0.060 (1.52)
0.070 (1.78)
0.080 (2.03)
0.090 (2.29)
0.100 (2.54)
0.110 (2.79) | 0.126 (0.187)
0.198 (0.295)
0.285 (0.424)
0.362 (0.539)
0.455 (0.677)
0.655 (0.975)
0.884 (1.317)
1.14 (1.703)
1.75 (2.609)
2.48 (3.692)
3.33 (4.954)
4.29 (6.393)
5.38 (8.010) | 1.09
1.71
2.46
3.13
3.92
5.65
7.65
9.85
15.13
21.42
28.73
37.08
46.45 | 810 (5585)
675 (4654)
625 (4310)
545 (3758)
495 (3415)
440 (3035)
385 (2655)
355 (2450)
315 (2170)
295 (2035)
275 (1895)
270 (1860)
255 (1760) |
| Annealed Coil | Standard
Size, in. | Outside Dia.
in. (mm) | Wall Thickness
in. (mm) | Weight, lb/ft
(kg/m) | Nom. Weight,
kgs 15 metres | * Safe Working
internal pressures
PSI (KPa) 150°F | 3/16
1/4
5/16
3/8
1/2
5/8
3/4
3/4
7/8
1 1/8
1 3/8 | 0.187 (4.76)
0.250 (6.35)
0.312 (7.92)
0.375 (9.52)
0.500 (12.7)
0.625 (15.9)
0.750 (19.1)
0.750 (19.1)
0.875 (22.2)
1.125 (28.6)
1.375 (34.9) | 0.030 (0.76)
0.030 (0.76)
0.032 (0.81)
0.032 (0.81)
0.032 (0.81)
0.035 (0.89)
0.035 (0.89)
0.042 (1.07)
0.045 (1.14)
0.050 (1.27)
0.055 (1.40) | 0.0575 (0.086)
0.0804 (0.120)
0.109 (0.162)
0.134 (0.199)
0.182 (0.271)
0.251 (0.373)
0.305 (0.454)
0.362 (0.539)
0.455 (0.677)
0.665 (0.975)
0.884 (1.317) | 1.28
1.80
2.43
2.98
4.07
5.62
6.81
8.09
10.16
14.62
19.75 | 1690 (11650)
1230 (8480)
1040 (7170)
860 (5930)
630 (4344)
540 (3723)
440 (3034)
535 (3690)
500 (3450)
430 (2965)
390 (2690) | |
|
|
| Copper Tube To ASTM B306 | | |
|
Copper Drainage Tube (DWV)
TYPE DWV | Nom.
Size (") | Dimensions (") | Calculated Values (Based on ASME B31) | | *Rated internal working pressures (psi) | Nom. Weight
(lbs per ft) | | Actual | Wall Thickness | Surface Temperature | | Outside Diameter | Up to 150°F | 300°F | | Annealed | Hard Drawn | Annealed | Hard Drawn | 1 1/4
1 1/2
2
3
4
5
6
8 | 1.375
1.625
2.125
3.125
4.125
5.125
6.125
8.125 | 1 3/8
1 5/8
2 1/8
3 1/8
4 1/8
5 1/8
6 1/8
8 1/8 | .040
.042
.042
.045
.058
.072
.083
.109 | 280
249
185
135
128
128
126
124 | 621
552
410
239
225
227
223
219 | 258
230
170
124
117
118
116
114 | 604
537
399
231
218
220
216
209 | 0.649
0.810
1.066
1.689
2.874
4.432
6.110
10.645 | | * Annealed | 150°F S = 5,100psi, sizes 1¼" to 8" | | | 300°F S = 4,700psi, sizes 1¼" to 8" | | Hard Drawn | 150°F S = 11,300psi, sizes 1¼" to 2", S = 9,00psi sizes 3" to 8" | | | 300°F S = 11,000psi, sizes 1¼" to 2", S = 8,70psi sizes 3" to 8" | | The figures provided are for guidance only, based on the indicated temperatures. | |
|
| Copper Tube Coils | | |
With a reputation of product excellence and reliability, arje metal industries offers its customers a wide range of high quality, soft annealed, single/double layer, plain and plastic coated copper coils for diverse applications. These tubes are manufactured with an outside diameter tolerance of +0.0/-0.08mm (0.003"), annealed at approximately 600°C, giving a hardness range of 45/60 HV5. Our smooth bore copper tubes are characterized by their bright, clean and dry internal and external surfaces. Superior dimensional control offers a trouble free performance and cost saving. The tube ends are capped at both ends to maintain the standard of cleanliness.
Arje Metals manufactures high quality plastic coated copper coils, copper alloy coils designed for protection against aggressive environment and colour coded to aid identification.
| Standards | | Phosphorus deoxidized copper (DLP) | standard | ASTM B –75 | BS 2871 | JIS H 3300 | DIN 1787 | | symbol | C 12000 | C106 | C 1201 | SW-CU | | Phosphorus deoxidized copper (DHP) | standard | ASTM B-68 | BS 2871 | JIS H 3300 | DIN 1785 | | symbol | C -12200 | C 106 | C 1220 | SF-CU | | Tough Pitch Copper (ETP) | standard | - | BS 2871 | JIS H 3300 | DIN 1787 | | symbol | C 11000 | C 101 | C 1100 | ECU 58 |
Dimensional Range - Outer Diameter - 3.15 mm to 22.00 mm
- Wall Thickness - 0.45 mm and above.
- Available in length between 5 meters and 30 meters.
- Available in single / double layer to match the requirement.
Other Features - Characterized by a bright, clean and dry outside and inside surface.
- Delivered with close ends to guarantee high internal cleanness.
- Available with pvc coating of blue, black or yellow colour with pvc thickness of 0.50 mm or 1.00mm.
- Can be hand straightened or bent as required using standard benders.
End Applications - Refrigeration and air conditioning, oil and gas lines and general engineering applications.
|
|
Copper Tubes For Water And Gas | |
|
| |
| |
|
| |
|
|
